NM

---

Description:

Content:

Classes:

• Connection - The NMConnection struct contains only private data.
• IP4Address
• IP4Route
• IP6Address
• IP6Route
• Setting - The NMSetting struct contains only private data.
• Setting8021x
• SettingAdsl
• SettingBluetooth
• SettingBond
• SettingBridge
• SettingBridgePort
• SettingCdma
• SettingConnection - The NMSettingConnection struct contains only private data.
• SettingDcb
• SettingGeneric
• SettingGsm
• SettingIP4Config
• SettingIP6Config
• SettingInfiniband
• SettingOlpcMesh
• SettingPPP
• SettingPPPOE
• SettingSerial
• SettingTeam
• SettingTeamPort
• SettingVPN
• SettingVlan
• SettingWimax
• SettingWired
• SettingWireless
• SettingWirelessSecurity

Enums:

• @80211ApFlags - 802.11 access point flags.
• @80211ApSecurityFlags - 802.11 access point security and authentication flags.
• @80211Mode - Indicates the 802.11 mode an access point or device is currently in.
• ActiveConnectionState - ActiveConnectionState values indicate the state of a connection to a specific network while it is starting, connected, or disconnecting from that network.
• BluetoothCapabilities - BluetoothCapabilities values indicate the usable capabilities of a Bluetooth device.
• ConnectivityState
• DeviceCapabilities - General device capability flags.
• DeviceModemCapabilities - DeviceModemCapabilities values indicate the generic radio access technology families a modem device supports.
• DeviceState
• DeviceStateReason - Device state change reason codes
• DeviceType - DeviceType values indicate the type of hardware represented by an NMDevice.
• DeviceWifiCapabilities - 802.11 specific device encryption and authentication capabilities.
• Setting8021xCKFormat - Setting8021xCKFormat values indicate the general type of a certificate or private key
• Setting8021xCKScheme - Setting8021xCKScheme values indicate how a certificate or private key is stored in the setting properties, either as a blob of the item's data, or as a path to a certificate or private key file on the filesystem
• SettingCompareFlags - These flags modify the comparison behavior when comparing two settings or two connections.
• SettingDcbFlags - DCB feature flags.
• SettingDiffResult - These values indicate the result of a setting difference operation.
• SettingGsmNetworkBand - SettingGsmNetworkBand values indicate the allowed frequency bands the device may use when connecting to this network.
• SettingGsmNetworkType - SettingGsmNetworkType values indicate the allowed access technologies the device may use when connecting to this network.
• SettingHashFlags - These flags determine which properties are added to the resulting hash when calling to_hash.
• SettingIP6ConfigPrivacy - SettingIP6ConfigPrivacy values indicate if and how IPv6 Privacy Extensions are used (RFC4941).
• SettingSecretFlags - These flags indicate specific behavior related to handling of a secret.
• State - State values indicate the current overall networking state.
• VPNConnectionState - VPN connection states
• VPNConnectionStateReason - VPN connection state reasons
• VPNPluginFailure - VPN plugin failure reasons
• VPNServiceState - VPN daemon states
• VlanFlags - VlanFlags values control the behavior of the VLAN interface.
• VlanPriorityMap - A selector for traffic priority maps; these map Linux SKB priorities to 802.1p priorities used in VLANs.
• WepKeyType - The WepKeyType values specify how any WEP keys present in the setting are interpreted.

Constants:

• public const string CONNECTION_CHANGED
• public const string CONNECTION_NORMALIZE_PARAM_IP6_CONFIG_METHOD
• public const string CONNECTION_PATH
• public const string CONNECTION_SECRETS_CLEARED
• public const string CONNECTION_SECRETS_UPDATED
• public const string DBUS_IFACE_SETTINGS
• public const string DBUS_IFACE_SETTINGS_CONNECTION
• public const string DBUS_IFACE_SETTINGS_CONNECTION_SECRETS
• public const string DBUS_INTERFACE
• public const string DBUS_INTERFACE_VPN
• public const string DBUS_INTERFACE_VPN_CONNECTION
• public const string DBUS_INVALID_VPN_CONNECTION
• public const string DBUS_NO_ACTIVE_VPN_CONNECTION
• public const string DBUS_NO_VPN_CONNECTIONS
• public const string DBUS_PATH
• public const string DBUS_PATH_AGENT_MANAGER
• public const string DBUS_PATH_SECRET_AGENT
• public const string DBUS_PATH_SETTINGS
• public const string DBUS_PATH_SETTINGS_CONNECTION
• public const string DBUS_PATH_VPN
• public const string DBUS_PATH_VPN_CONNECTION
• public const string DBUS_SERVICE
• public const string DBUS_VPN_ALREADY_STARTED
• public const string DBUS_VPN_ALREADY_STOPPED
• public const string DBUS_VPN_BAD_ARGUMENTS
• public const string DBUS_VPN_ERROR_PREFIX
• public const string DBUS_VPN_INTERACTIVE_NOT_SUPPORTED
• public const string DBUS_VPN_SIGNAL_CONNECT_FAILED
• public const string DBUS_VPN_SIGNAL_IP4_CONFIG
• public const string DBUS_VPN_SIGNAL_IP_CONFIG_BAD
• public const string DBUS_VPN_SIGNAL_LAUNCH_FAILED
• public const string DBUS_VPN_SIGNAL_LOGIN_BANNER
• public const string DBUS_VPN_SIGNAL_LOGIN_FAILED
• public const string DBUS_VPN_SIGNAL_STATE_CHANGE
• public const string DBUS_VPN_SIGNAL_VPN_CONFIG_BAD
• public const string DBUS_VPN_STARTING_IN_PROGRESS
• public const string DBUS_VPN_STOPPING_IN_PROGRESS
• public const string DBUS_VPN_WRONG_STATE
• public const int MAJOR_VERSION
  Evaluates to the major version number of NetworkManager which this source is compiled against.
• public const int MICRO_VERSION
  Evaluates to the micro version number of NetworkManager which this source compiled against.
• public const int MINOR_VERSION
  Evaluates to the minor version number of NetworkManager which this source is compiled against.
• public const string SETTING_DCB_APP_FCOE_FLAGS
• public const string SETTING_DCB_APP_FCOE_MODE
• public const string SETTING_DCB_APP_FCOE_PRIORITY
• public const string SETTING_DCB_APP_FIP_FLAGS
• public const string SETTING_DCB_APP_FIP_PRIORITY
• public const string SETTING_DCB_APP_ISCSI_FLAGS
• public const string SETTING_DCB_APP_ISCSI_PRIORITY
• public const string SETTING_DCB_FCOE_MODE_FABRIC
  Indicates that the FCoE controller should use "fabric" mode (default)
• public const string SETTING_DCB_FCOE_MODE_VN2VN
  Indicates that the FCoE controller should use "VN2VN" mode.
• public const string SETTING_DCB_PRIORITY_BANDWIDTH
• public const string SETTING_DCB_PRIORITY_FLOW_CONTROL
• public const string SETTING_DCB_PRIORITY_FLOW_CONTROL_FLAGS
• public const string SETTING_DCB_PRIORITY_GROUP_BANDWIDTH
• public const string SETTING_DCB_PRIORITY_GROUP_FLAGS
• public const string SETTING_DCB_PRIORITY_GROUP_ID
• public const string SETTING_DCB_PRIORITY_STRICT_BANDWIDTH
• public const string SETTING_DCB_PRIORITY_TRAFFIC_CLASS
• public const string SETTING_DCB_SETTING_NAME
• public const string SETTING_NAME
• public const int VLAN_FLAGS_ALL

Delegates:

• public delegate bool SettingClearSecretsWithFlagsFn (Setting setting, string secret, SettingSecretFlags flags)
• public delegate void SettingValueIterFn (Setting setting, string key, Value value, ParamFlags flags)
• public delegate bool UtilsFileSearchInPathsPredicate (string filename)
• public delegate void VPNIterFunc (string key, string value)