[ NoAccessorMethod ]
public string method { owned get; set; }
IPv6 configuration method.
If "auto" is specified then the appropriate automatic method (PPP, router advertisement, etc) is used for the device and most other properties can be left unset. To force the use of DHCP only, specify "dhcp"; this method is only valid for Ethernet- based hardware. If "link-local" is specified, then an IPv6 link-local address will be assigned to the interface. If "manual" is specified, static IP addressing is used and at least one IP address must be given in the "addresses" property. If "ignore" is specified, IPv6 configuration is not done. This property must be set. Note: the "shared" method is not yet supported.